Welcome to NMG.

CN EN

Zhejiang NMG New Materials Co., Ltd.

Home > Product > Soteco Foam
Soteco Foam

    Atlas F

    • Processing size
    • Quantity

    Atlas F is one of the SOTECO FOAM foam. Being a closed-cell polymeric foam, Atlas Foam F features very low thermal conductivity and water absorption. Thanks to a very fine cellular structure,and a peculiar chemical nature, Atlas Foam F takes up a very low amount of resin during sandwich production, and offers a very good adhesion to GRP skins in the same time (good peeling properties). Atlas Foam F can be efficiently used in all standard industrial processes like hand lay-up, vacuum infusion, RTM. Atlas Foam F has a higher styrene resistance than PVC, Further tomechanical performance low environmental impact and worldwide material availability characterize our product.

    1. Detailed information

    Atlas F is one of the SOTECO FOAM foam. Being a closed-cell polymeric foam, Atlas Foam F features very low thermal conductivity and water absorption. Thanks to a very fine cellular structure,and a peculiar chemical nature, Atlas Foam F takes up a very low amount of resin during sandwich production, and offers a very good adhesion to GRP skins in the same time (good peeling properties). Atlas Foam F can be efficiently used in all standard industrial processes like hand lay-up, vacuum infusion, RTM. Atlas Foam F has a higher styrene resistance than PVC, Further tomechanical performance low environmental impact and worldwide material availability characterize our product. 

    ProductCharacteristicsApply InApplicableProcesses

    ·Very high fatigue resistance

    ·Wind energy 
    Wind turbine nacelle covers, …

    ·Contact Forming(Hand/Spray)

    ·High mechanical strength and stiffness

    ·Marine
    Hulls,decks, bulkheads, …

    ·RTM and Vacuum Infusion

    ·Higher styrene resistance than PVC foams

    ·Road and Rail:
    Roof panels, interiors, partition walls, side skirts, …

    ·Adhesive Bonding

    ·Highertemperature resistance than PVC foams

    ·Recreation: 
    Skis,snowboards, surfboards, …

    ·Pre-preg Processes

    ·Ideal for resin infusion

    ·Industrial: 
    Tooling,tanks, ductwork, covers, …

    ·Thermoforming

    ·Lower resin intake than other foams



    ·Recyclable



    技术说明/ TechnicalSpecification

    TypicalPerformance

    unit

    F60

    F65

    F80

    NominalDensity

    ASTM- D 1622

    Kg/m3

    60

    65

    80

    CompressiveStrength

    ASTM- D 1621

    MPa

    0.6

    0.65

    0.85

    CompressiveModulus

    ASTM- D 1621

    MPa

    36

    38

    48

    ShearStrength

    ASTM- C 273

    MPa

    0.5

    0.52

    0.7

    ShearModulus

    ASTM- C 273

    MPa

    7

    8

    12

    ShearElongation    

    ASTM - C 273

    %

    30

    30

    25

    WaterAbsorption

    ISO 2896

    %

    <0.04

    <0.04

    <0.04

    Initial Thermal Conductivity (at 10°C)

    ASTM- C 518

    W/mK

    0.024

    0.024

    0.026

    Heat Distortion Temperature

    DIN- 53 424

    110

    110

    120

    Service Temperature

    /

    -180,+100

    Colour

    /

    /

    White

    Green

    Green

     

    Standard Sheet Dimensions (width x length)
    Standard Thickness (min - max)

    /

    mm

    1250X 2550(± 5)
    2 -200(± 0.2)

    Deep Groove Width

    mm

    0.8(±0.5)

    Shallow Groove Width

    mm

    2(±0.5)

    Hole Size

    mm

    2(±0.5)